In order to make the well cover have a better effect, when producing the well cover mold, some materials such as sand and soil will be added into the cement, and then uniformly poured into the mixer and added with clean water to start mixing.
之后將攪拌好的水泥澆筑在井蓋模具的里面開始制作生產，因為模具的型號比較的小，所以他的制作非常的短。
Then pour the mixed cement into the well cover mold and start production. Because the model of the mold is relatively small, his production is very short.
水泥的好壞會直接影響到生產出來的預制塊，如果水泥式劣質的，存在大量的雜質，制作出來的條石硬度不夠的話就不能夠正常使用，也會給井蓋模具造成磨損。
The quality of cement will directly affect the prefabricated blocks produced. If the cement is of poor quality, there are a lot of impurities, and the hardness of the manufactured strip stone is not enough, it will not be able to be used normally, and it will also cause wear and tear to the well cover mold.
因為井蓋模具是模具的一種，所以如果出現破損是不能夠修補的，只能夠更換新的模具進行加工生產，然后將舊模具送回處理廠。
Because the well cover mold is a kind of mold, if it is damaged, it cannot be repaired. Only a new mold can be replaced for processing and production, and then the old mold can be sent back to the treatment plant.
井蓋模具的用途是面對當前在公路兩側使用的小型混凝土井蓋兒命名的，使用井蓋模具能夠讓井蓋預制塊的速度更快一些，加快了工程的進展。
The purpose of the well cover mold is named after the small concrete well covers currently used on both sides of the highway. The use of the well cover mold can make the prefabricated block of the well cover faster and speed up the progress of the project.
